
Outlet Valves AXDV-A
Product variants
Select variation
Low to high-viscosity lubricants can be precise, flexible, controlled and variable applied with the new A-series outlet valves from ABNOX in a compact design. The pull-back effect when closing the valve prevents dripping of the medium after dosing.
The clearance is 2.2 mm (AXDV-A1) and 4.3 mm (AXDV-A3). These valves can be used for grease application to specific points or also for higher application volumes such as beads or lines as well as lubricant filling depending on the activation time.
The opening cross-section of this ABNOX outlet valve is fixed. Optionally the speed of the lubrication medium can be regulated by means of the applied pump pressure or a choke valve.
For external control for the outlet valves with assembly block, a simple pneumatic 5/2-way valve is required. To control the dosing process with the shortest switching distances directly on the outlet valve, we recommend control with our upgrading option electro-pneumatic solenoid valve.
On the outlet valves with handgrip (models PN/HG/SV), the pneumatic part of the metering valve is controlled by a 5/2 way valve which is located inside the handle. Pressing the trigger initiates ejection of the metered medium.
ABNOX outlet valves of the series with handgrip (models PN/HG/SV) are suitable for all and especially for vertically accessible lubrication points. The ergonomic and shapely handle with modern and optimised metering activator is especially suited for easy and handy operation of the outlet valve at installation sites. Handling of these outlet valves may be further facilitated by using a counterbalance suspended directly above the assembly area.
All ABNOX outlet valves are equipped with modern seals and glydrings, they warrant a long lifespan even at operating pressures as high as 200 bar.
The electronic position switch is available as accessory, Art.-No. 0001220. It may be attached to the grooves of the outlet valve by means of an attachment screw in a continuously variable position. They increase the effectivity and reliability of the spraying operation, and allow improved control over your production process. Furthermore, the operation display (LED) indicates the end position of the dosing needle. To achieve highest process reliability, ABNOX recommends the use of position switches on both end positions.
Experience the outlet valve in action in our product video
Standard (Assembly Block)
Article No. | Modell | Design | Version |
![]() |
4192400 | AXDV-A1-LUER (V3.0) | Standard (Assembly Block) | Clearance 2.2 mm / with LUER connection |
loading...
![]() |
4192401 | AXDV-A1-G1/8 (V3.0) | Standard (Assembly Block) | Clearance 2.2 mm / with 1/8'' BSP connection |
loading...
![]() |
4193000 | AXDV-A3-G1/8 (V3.0) | Standard (Assembly Block) | Clearance 4.3 mm / with 1/8" BSP connection |
loading...
Handgrip PN / HG / SV
Article No. | Modell | Design | Version |
![]() |
4192430 | AXDV-A1-PN-LUER (V3.0) | Handgrip PEN | Clearance 2.2 mm / with LUER connection |
loading...
![]() |
4192431 | AXDV-A1-PN-G1/8 (V3.0) | Handgrip PEN | Clearance 2.2 mm / with 1/8'' BSP connection |
loading...
![]() |
4193011 | AXDV-A3-HG-LUER (V3.0) | Handgrip Horizontal | Clearance 4.3 mm / with LUER connection |
loading...